PARTING & GROOVING
NPA 8/2021
Expanding the PENTACUT Line with New Inserts and Tools
Highlights
ISCAR is expanding the PENTACUT Line by adding:
- PENTA 17 ... new SP (Super Positive) chipformer
- PENTA 17 JET CUT toolholders in shank sizes of 10-25 mm
- PENTA 17 JET CUT adapters
- PENTA 17R\L...6D/15D for Parting
- PENTA 27 new blanks with 10 and 15 mm widths for wide profiles
- PENTA 24 inserts with IC1010 grade 1.5\2.0\3.0 mm neutral version types
Products and Features
- PENTA 17 ... with the new SP chipformer is intended for
machining soft materials and stainless steel.
The 18° positive rake angle of the insert assures low cutting forces and provides easy chip breaking for low feed rates from 0.02-0.06 mm/rev.
The inserts are available in sizes 0.3\0.5\0.8\1.0 mm.
- JETCUT square shank toolholder for PENTA 17 inserts
are designed to provide high-pressure coolant of up to 340 Bar.
The tools have 3 coolant inlets that enable several connection options and two outlets to cool the insert from the top and bottom in the most efficient way.
The tools are available in 10-25 mm.
- New PCADRS/LS adapters for PENTA 17 inserts are designed to provide high-pressure coolant of up to 340 Bar. These adapters have 2 coolant outlets from the top and bottom of the tool pocket which enable efficient flow of the coolant.
The adapters fit standard MAHR/L and MAHPR/L tools.
- PENTA 17R\L...6D/15D lead angle cutting edge inserts were designed for Parting when minimum burr size is needed. Offered with 6° and 15° lead angles.
The inserts are available in sizes 1.0\1.5 and 2.0 mm.
- PENTA 27 new blanks with 10 and 15 mm widths were added to ISCAR’s wide PENTA 27-20FT blank (20 mm width). These new blanks can be ground to special wide profiles that assure an economical price per cutting edge based on the 5 cutting edge feature. These insert blanks are intended for shallow profiling and grooving depth for square type holders PCHR\L...-27-10\15\20.
- PENTA 24 popular size inserts in IC1010 grade.
Due to the positive sales growth of the TANG-GRIP and DO-GRIP inserts grade IC1010, this phenomenal grade has been added to the PENTA 24 line. Available in 1.5, 2.0, 3.0 mm widths.
Grade Features
- TiAlN coating overlays the sub-micron IC08 grade
- Recommended for general parting and grooving applications at medium to high cutting speeds
and low to medium feeds
- Toughness advantages compared to grades IC908 and IC808
- The cutting parameters are the same compared to grade IC808
PCHRS/LS-17-JHP
Tools Carrying Inserts with 5 Cutting Edges for Shallow Profiling Next to High Shoulders
• Use right-hand inserts on right-hand tools and vice versa
PCADRS/LS-JHP
Adapters with High-Pressure Coolant Holes for PENTACUT 17
• CDX and CUTDIA according to insert limitation
(1) Minimum cutting width
(2) Maximum cutting width
(3) Maximum overhang
PENTA 17R/L-P-RS
Lead Angle Edge Pentagonal Inserts (5 edges) for Parting Miniature Parts
PENTA 17R/L-SP-RS
Pentagonal Inserts (5 edges) with a High Positive Rake for Parting Soft Materials
PCHR/L-27-JHP-MC
Tools Carrying Pentagonal Wide Inserts for Specially Tailored Profiles
PENTAS 27 blanks
Blank Insert with 5 Wide Cutting Edges for the Production of Special Profile Contours
The NPA08-2021's pdf file:
View (PDF) or
Download (ZIP)
